Yantai Bonway Chaw tsim tshuaj paus

Ceramic Industry, Glass Industry, Food Industry, Metallurgy Industry, Beer& Drink Industry, Printing and dyeing Industry, Textile Industry, Warehouse Logoistics Industry, Wood working Machinery, environmental protection equipment Industry, Leather Industry, Pharmacy Industry

4.1.We provide 12 months Warranty.
4.2. We have thousands of gearbox reducers. From Input Power 0.06KW to 200KW, Ratio 1.3-289.74, Output speed 0-1095rpm and Output torque 1.4-62800Nm. They can meet your all different requirements for different industries.
4.3. Peb muab E-catalog lossis Daim Ntawv Teev Npe, yog li koj tuaj yeem xaiv cov qauv yooj yim raws li koj qhov yuav tsum tau ua 
4.4.You are welcome to visit our factory to check our products,we can help you to book the hotel or ticket.

1. Main Materials
(1) Housing: die-cast aluminum alloy (frame size 27 to 57)
(2) Gear wheel: 20CrMnTiH1 carbonizing & quenching heat treatment make the hardness of gears surface be up to 56-62 HRC, and be retained carburization layers thickness between 0.3 and 0.5mm after precise grinding.
2. Surface Painting
Aluminium alloy vaj tsev:
(1) Shot blasting and special antiseptic treatment on the aluminum alloy surface.
(2) After phosphating, spray the RAL9022 silver white paint.

1. Before assembling Hypoid gear motor and mechanical equipment, check whether the rotation direction of the output shaft of Hypoid gear motor is correct;
  2. Before assembling Hypoid gear motor and prime mover and equipment, check the deviation dimensions of each shaft diameter, aperture, key and keyway to avoid the performance of Hypoid gear motor;
  3. Hypoid gear motor must be installed on the mechanical equipment to avoid looseness and vibration;
  4. Avoid exposing Hypoid gear motor to the sun and the harsh environment as much as possible;
  5. If the storage time of Hypoid gear motor is 4-6 months, check whether the sealing glaze is completely infiltrated in the lubricating oil. The oil sealing lip may lose its elasticity. Since the suitable elasticity is a necessary condition for the oil seal work, it is recommended to replace the oil seal. ;
  6. Tag nrho cov khoom siv roj hmab thiab qhov cua tshuab tsis tuaj yeem nyob hauv cov xim pleev xim;
  7. When the hollow shaft and the solid shaft of Hypoid gear motor are linked with each other, the lubricating part of the shaft should be coated with lubricating oil to avoid jamming;
  8. Cov roj theem yuav tsum tau kuaj xyuas thaum siv (xws li roj qib daim iav lub qhov taub lossis qhib lub taub roj, qhov qauv me me tsis muaj);
  9. When using the new Hypoid gear motors, it cannot start at full load, and should not increase the load;
  10. When using various types of motor direct-connected Hypoid gear motors, if the weight of the motor is too large, support devices should be provided;
  11. Xyuas kom meej tias muaj qhov cua zoo nyob ze ze ntawm lub kiv cua lub cev kom tsis txhob muaj kev cuam tshuam lub tshav kub dissipation effect;
  12. The standard working environment temperature of Hypoid gear motor is -5 °C to 40 °C. If it is not within this range, please contact our technical staff.