Yantai Bonway Manufacturer

accessories

Xaub cov ntsia hlau rau qhov loj me ntawm lub cav 280 - 400

Xaub cov ntsia hlau rau qhov loj me ntawm lub cav 280 - 315

Xaub cov ntsia hlau rau qhov loj me ntawm lub cav 355 - 400

Note: Slide rails that do not fulfill the DIN standard are available for motor size 450 on request.

A set of slide rails includes two complete rails with screws for mounting the motor on the rails. Screws for mounting the rails on the foundation are not included. Slide rails have unmachined lower surfaces and should be supported in a suitable manner before tightening down.

Slide rails can be ordered with article numbers shown in the table.

Tsav															bolts	kab rov tav	Nyhav
loj	Tshooj no.	l1	l2	l3	a	h	b1	b2	c	d	e1	e2	e3	e4	mus ko taw	bolts	kg/2 pc
280	3GZF334730-55	800	600	900	16	75	100	120	35	28	100	100	200	165	M20x90	M24x300	50
315	3GZF334730-56	1000	720	1100	16	80	120	140	40	28	140	140	240	190	M24x100	M24x300	80
355 - 400	3GZF334730-57	1250	485	1350	16	80	120	140	35	28	140	140	240	190	M24x100	M24x300	90

 Motors in brief

Cast iron motors, sizes 71 - 132

Lub cev muaj zog me me		71	80	90	100	112	132
Stator and end shields	khoom	Cam khwb cia hlau
	Paint color shade	Munsell blue 8B 4.5/3.25
	Chav kawm Corrosion	C3 (medium)
Taw		Integrated cast iron feet
Bearings	D-kawg	6203-2 Z/C3	6204-2 Z/C3	6205-2 Z/C3	6206-2 Z/C3	6206-2Z/C	6208-2 Z/C3
	N-kawg	6202-2 Z/C3	6203-2 Z/C3	6204-2 Z/C3	6205-2 Z/C3	6205-2Z/C3 *)	6208-2 Z/C3
Axially locked bearings		Locked at D-end
Bearing seals	D-kawg	V-ntiv nplhaib
	N-kawg	Labyrinth seal in IE2, V-ring in IE3
lubrication		Permanently lubricated shielded bearings
Measuring nipples for		tsis muaj
condition monitoring of
the bearings
Ntsuas phaj	khoom	stainless hlau
Lub davhlau ya nyob twg	Ncej thiab npog	Cam khwb cia hlau
	Chav kawm Corrosion	C3 (medium)
	Npog cov ntsia hlau	Zinc-electroplated steel
kev sib txuas	Threaded openings	2xm16 ua	2xm25 ua	2xm25 ua
	Terminals	6 terminals for connection with cable lugs (not included)
	Cov qog Cable	Cable flange included, glands as option
ntxuam	khoom	Glass-fiber reinforced polypropylene
Kiv cua npog	khoom	Steel
	Paint color shade	Munsell blue 8B 4.5/3.25
	Chav kawm Corrosion	C3 (medium)
Stator winding	khoom	Tooj
	Rwb thaiv tsev	Insulation class F. Temperature rise class B unless otherwise stated.
	Winding protection	3 PTC thermistors, 150 °C
Rotor winding	khoom	Siab tuag-cast aluminium
Balancing method		Half-key balancing as standard
Yeem		Closed keyway
Ntws qhov		Drain holes with closable plastic plugs, open on delivery
enclosure		IP 55
cua txias txoj kev		SIB 411

 *) 6206-2Z/C3 in IE3

Motors in brief

Cast iron motors, sizes 160 - 250

Lub cev muaj zog me me		160	180	200	225	250
Stator and end shields	khoom	Cam khwb cia hlau
	Paint color shade	Munsell blue 8B 4.5/3.25
	Chav kawm Corrosion	C3 (medium)
Taw	khoom	Integrated cast iron feet, bolted feet when terminal box on LHS/RHS
Bearings	D-kawg	6309 / C3	6310 / C3	6312 / C3	6313 / C3	6315 / C3
	N-kawg	6209 / C3	6209 / C3	6210 / C3	6212 / C3	6213 / C3
Axially locked bearings		Locked at D-end
Bearing seals	D-kawg	Gamma-ring
	N-kawg	Gamma-ring
lubrication		Regreasable bearings, regreasing nipples M6x1
Measuring nipples for		muaj
condition monitoring of
the bearings
Ntsuas phaj	khoom	stainless hlau
Lub davhlau ya nyob twg	Ncej thiab npog	Cam khwb cia hlau
	Chav kawm Corrosion	C3 (medium)
	Npog cov ntsia hlau	Zinc-electroplated steel
kev sib txuas	Cable nkag	2xM40, 2xM20		2xM63, 2xM20
	Terminals	6 terminals for connection with cable lugs (not included)
	Cov qog Cable	Cable flange included, glands as option
ntxuam	khoom	Glass-fiber reinforced polypropylene
Kiv cua npog	khoom	Steel
	Paint color shade	Munsell blue 8B 4.5/3.25
	Chav kawm Corrosion	C3 (medium)
Stator winding	khoom	Tooj
	Rwb thaiv tsev	Insulation class F. Temperature rise class B unless otherwise stated.
	Winding protection	3 PTC thermistors, 150 °C
Rotor winding	khoom	Siab tuag-cast aluminium
Balancing method		Half-key balancing as standard
Yeem		Closed keyway
Ntws qhov		Drain holes with closable plastic plugs, open on delivery
enclosure		IP 55
cua txias txoj kev		SIB 411

 Motors in brief

Cast iron motors, sizes 280 - 450

 

Lub cev muaj zog me me			280	315	355	400	450
Stator and end shields	khoom	Cam khwb cia hlau
	Paint color shade	Munsell blue 8B 4.5/3.25
	Chav kawm Corrosion	C3 (medium)
Taw	khoom	Integrated cast iron feet
Bearings	D-kawg	2-tug	6316 / C3	6316 / C3	6316M / C3	6317M / C3	6317M / C3
		4-12-pole	6316 / C3	6319 / C3	6322 / C3	6324 / C3	6326M / C3
	N-kawg	2-tug	6316 / C3	6316 / C3	6316M / C3	6317M / C3	6317M / C3
		4-12-pole	6316 / C3	6316 / C3	6316 / C3	6319 / C3	6322 / C3
Axially locked bearings		Locked at D-end
Bearing seals	D-kawg	V-ring or labyrinth seal
	N-kawg	V-ring or labyrinth seal
lubrication		Regreasable bearings, regreasing nipples M10x1
Measuring nipples for		muaj
condition monitoring of
the bearings
Ntsuas phaj	khoom	stainless hlau
Lub davhlau ya nyob twg	Ncej thiab npog	Cam khwb cia hlau					Npog hlau
	Chav kawm Corrosion	C3 (medium)					Steel
	Npog cov ntsia hlau	Zinc-electroplated steel
kev sib txuas	Cable	2-4-pole	2xM63+2xM20	2xM63, 2xØ48-	2xØ48-60, 60-80,	2xØ60-80 (2-6-pole)	2xM2+0
	nkag			60+2xM20	2xm20 ua		2xØ60-80, 2xM20
		6-8-pole			2xØ32-49, 48-60,	2xØ48-60 (8-pole),
					2M20	2xm20 ua
				See section Standard terminal box for detailed information.
	Terminals		6 terminals for connection with cable lugs (not included)
	Cov qog Cable		Cable flange, glands as option
ntxuam	khoom	Glass-fiber reinforced polypropylene
Kiv cua npog	khoom	Steel
	Paint color shade	Munsell blue 8B 4.5/3.25
	Chav kawm Corrosion	C3 (medium)
Stator winding	khoom	Tooj
	Rwb thaiv tsev	Insulation class F. Temperature rise class B unless otherwise stated
	Winding protection	3 PTC thermistors, 155 °C
Rotor winding	khoom		Siab tuag-cast aluminium
Balancing method			Ib nrab-qhov tseem ceeb ntsuas
Yeem			Open keyway
Ntws qhov			Drain holes with closable plastic plugs, open on delivery
enclosure			IP 55
cua txias txoj kev			SIB 411

 Lub cev muaj zog kev tsim kho

Exploded view, frame size 315

1 Stator frame

2 End shield, D-end

3 Screws for end shield, D-end

V-ring in 4-8 pole motors

4 End shield, N-end

5 Screws for end shield, N-end

6 Rotor with shaft

7 Key, D-end

8 Terminal thawv

9 Terminal pawg thawj coj saib

10 Intermediate flange

11 Screws for terminal box cover

12 Outer bearing cover, D-end

13 Valve disc with labyrinth seal, D-end; standard in 2-pole motors,

14 Bearing, D-end

15 Inner bearing cover, D-end

16 Screws for bearing cover

17 Outer bearing cover, N-end

18 Seal, N-end

19 Lub caij nplooj ntoo hlav

20 Valve disc, N-end

21 Bearing, N-end

22 Inner bearing cover, N-end

23 Screws for bearing cover

24 Ntxuam

25 Ntxuam npog

26 Screws for fan cover

27 Rating phaj

28 Lubrication plate

29 Grease nipple, D-end

30 Grease nipple, N-end

31 SPM nipple, D-end

32 SPM nipple, N-end

Tag nrho cov khoom muab

Motors, generators and mechanical power transmission products with a complete portfolio of services

IEC motors

– Low voltage motors

– High voltage induction and synchronous motors

– Marine motors

– Motors for explosive atmospheres

– Motors for food and beverage

– Motors for variable speed drives

– Permanent magnet motors

– Synchronous reluctance motors

– Traction motors

NEMA motors

– Low voltage motors

– High voltage induction and synchronous motors

– Marine motors

– Motors for explosive atmospheres

– Motors for variable speed drives

– Permanent magnet motors

– Servomotors

– Washdown motors

Generators

– Generators for wind turbines

– Generators for diesel and gas engine power plants

– Generators for steam and gas turbine power plants

– Generators for marine applications

– Generators for industrial applications

– Generators for traction applications

– Synchronous condensers for reactive power compensation

Mechanical power transmission components,

bearings, gearings

– Mounted bearings

– Enclosed gearing

– Mechanical drive components

– Couplings

– Sheaves and bushings

– Conveyor components

– Geared motor units

Life cycle services

ABB cov ntaub ntawv tsav tsheb

Optimal solution for you

Being able to rely on the continuous high performance and efficiency of your operations is something you want to take for granted. ABB variable frequency drives are made with all this in mind, established upon more than 40 years of experience and backed by a broad range of life cycle services.

ABB drives help you to optimize your processes and systems with state-of-the-art motor control technology, resulting in increased energy efficiency, better product quality, and reduced operating costs with higher output, less downtime, and reduced need for maintenance. All ABB drives are designed for easy selection, ordering, installation and use, and they offer integrated safety features, giving you more time to focus on what matters for you and your business.

Our portfolio offers low-voltage AC and DC drives, medium-voltage AC drives, and motion control drives spanning the fractional-kilowatt to multimegawatt power level. There is a drive available for essentially every industry and application and for all types of motors, in environments ranging from water utility facilities to clean electrical rooms, and to harsh coal mines and windy offshore platforms to food and beverage production. This wide product range allows you to select the best-fitting drive solution, providing maximum reliability and efficiency for every need.

Tiv tauj peb

www.sogears.com

Txawb: + 86-18563806647

Whatsapp / Wechat: +8618563806647

E-mail: Qhov no email chaw nyob yog tiv thaiv los ntawm spambots. Koj yuav tsum JavaScript enabled mus saib nws.; Skype ID: qingdao411